Platon Technologies
not logged in Login Registration
EnglishSlovak
open source software development celebrating 10 years of open source development! Thursday, September 19, 2019

File: [Platon] / ep / install-sh (download)

Revision 1.1.1.1 (vendor branch), Fri Sep 21 19:04:13 2001 UTC (18 years ago) by host8


Changes since 1.1: +0 -0 lines

Initialization

#!/bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission.  M.I.T. makes no representations about the
# suitability of this software for any purpose.  It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.  It can only install one file at a time, a restriction
# shared with many OS's install programs.


# set DOITPROG to echo to test this script

# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"


# put in absolute paths if you don't have them in your path; or use env. vars.

mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"

transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""

while [ x"$1" != x ]; do
    case $1 in
    -c) instcmd="$cpprog"
        shift
        continue;;

    -d) dir_arg=true
        shift
        continue;;

    -m) chmodcmd="$chmodprog $2"
        shift
        shift
        continue;;

    -o) chowncmd="$chownprog $2"
        shift
        shift
        continue;;

    -g) chgrpcmd="$chgrpprog $2"
        shift
        shift
        continue;;

    -s) stripcmd="$stripprog"
        shift
        continue;;

    -t=*) transformarg=`echo $1 | sed 's/-t=//'`
        shift
        continue;;

    -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
        shift
        continue;;

    *)  if [ x"$src" = x ]
        then
        src=$1
        else
        # this colon is to work around a 386BSD /bin/sh bug
        :
        dst=$1
        fi
        shift
        continue;;
    esac
done

if [ x"$src" = x ]
then
    echo "install:    no input file specified"
    exit 1
else
    true
fi

if [ x"$dir_arg" != x ]; then
    dst=$src
    src=""
    
    if [ -d $dst ]; then
        instcmd=:
        chmodcmd=""
    else
        instcmd=mkdir
    fi
else

# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad 
# if $src (and thus $dsttmp) contains '*'.

    if [ -f $src -o -d $src ]
    then
        true
    else
        echo "install:  $src does not exist"
        exit 1
    fi
    
    if [ x"$dst" = x ]
    then
        echo "install:    no destination specified"
        exit 1
    else
        true
    fi

# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic

    if [ -d $dst ]
    then
        dst="$dst"/`basename $src`
    else
        true
    fi
fi

## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`

# Make sure that the destination directory exists.
#  this part is taken from Noah Friedman's mkinstalldirs script

# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='    
'
IFS="${IFS-${defaultIFS}}"

oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"

pathcomp=''

while [ $# -ne 0 ] ; do
    pathcomp="${pathcomp}${1}"
    shift

    if [ ! -d "${pathcomp}" ] ;
        then
        $mkdirprog "${pathcomp}"
    else
        true
    fi

    pathcomp="${pathcomp}/"
done
fi

if [ x"$dir_arg" != x ]
then
    $doit $instcmd $dst &&

    if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
    if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
    if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
    if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else

# If we're going to rename the final executable, determine the name now.

    if [ x"$transformarg" = x ] 
    then
        dstfile=`basename $dst`
    else
        dstfile=`basename $dst $transformbasename | 
            sed $transformarg`$transformbasename
    fi

# don't allow the sed command to completely eliminate the filename

    if [ x"$dstfile" = x ] 
    then
        dstfile=`basename $dst`
    else
        true
    fi

# Make a temp file name in the proper directory.

    dsttmp=$dstdir/#inst.$$#

# Move or copy the file name to the temp name

    $doit $instcmd $src $dsttmp &&

    trap "rm -f ${dsttmp}" 0 &&

# and set any options; do chmod last to preserve setuid bits

# If any of these fail, we abort the whole thing.  If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.

    if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
    if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
    if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
    if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&

# Now rename the file to the real destination.

    $doit $rmcmd -f $dstdir/$dstfile &&
    $doit $mvcmd $dsttmp $dstdir/$dstfile 

fi &&


exit 0

Platon Group <platon@platon.org> http://platon.org/
Copyright © 2002-2006 Platon Group
Site powered by Metafox CMS
Go to Top