upamfva
Joined: 05 May 2021
Posts: 918
Posted: 2022-03-30 03:34
Back to top
Reply with quote
|
YLSK-35 computer universal spring machine
1, YLSK-35 computer spring machine using the computer control system in Taiwan and Japan imported servo motor.Get more news about
Universal Spring Machine
,you can vist our website!
2, camshaft, send spool, turn the mandrel, the auxiliary shaft (optional), four-axis can be combined transport. The mechanical part of a total of eight sets of slide, crank and cam rotary axle. Cam fixed to the rotating shaft can screw before and after adjustment, and to promote the movement of the carriage. The mechanical action of three ways: extrusion, stamping and molding.
3, YLSK-35 machine configuration Taiwan SMC502 computer, computer system memory 1000 part program, the position of each axis, wire feeding, production speed, production quantities are displayed on the screen. Program information easily set and change the keyboard, debugging very convenient.
Wire feeding system: the level of line feed system mounted in the rear of the machine, every two sending wire wheel one pair, YLSK-35 fitted sending wire wheel diameter is not at the same time shall be fitted with suitable to sending wire wheel. Computer controlled wire feed system, each unit is approximately 0.01mm, each command 99,999.99 motor units. Features: minimal wear, noise, and high synchronization accuracy of the control system.
Alien spring YLSK-35 can produce a variety of extension spring, compression spring, telescoping spring, double torsion, flat spring. The required precision springs can be used in lighting, electronics, toys, home appliances, sports equipment, automotive and other industries.
|
|
Post new topic
Reply to topic
|
|
|
Login
Registration
Slovak
