| Index
» Projects
» phpMyEdit
» Forum
» WHAT MAKES A LINEAR STAGE DIFFERENT FROM OTHER TYPES OF LINE |
 |
pysong
Joined: 02 Feb 2023
Posts: 629
Posted: 2023-06-02 07:07
Back to top
Reply with quote
|
WHAT MAKES A LINEAR STAGE DIFFERENT FROM OTHER TYPES OF LINEAR MOTION SYSTEMS?
Linear motion systems — consisting of a base or housing, a guide system, and a driving mechanism — are available in a wide variety of designs and configurations to suit almost any application. And because their designs are so varied, they’re often categorized according to key construction and operating principles. Case in point: The term “actuator” typically refers to a linear motion system with an aluminum housing that encloses the guide and drive mechanisms; systems referred to as “tables,” or “XY tables,” are commonly designed with a flat baseplate to which the guide and drive components are mounted; and “linear stage” or “linear translation stage” typically refers to a system similar in construction to a linear table but designed to minimize errors in positioning and travel.Get more news about
linear motion stage manufacturers
,you can vist our website!
Although there are no rules or strict guidelines for what constitutes a linear stage, they’re widely recognized as the most precise category of linear motion systems. When a system is referred to as a linear stage, it’s generally understood that the system will provide not just high positioning accuracy and repeatability, but also low angular and planar errors. To achieve this level of performance, there are several principles that manufacturers generally follow in terms of construction and the type of components used in the stage design.
First, unlike other linear motion systems, which commonly use an aluminum extrusion or plate as the base, a linear stage begins with a precision-ground base. Stages designed for the highest levels of flatness, straightness, and rigidity often use a base made of steel or granite, although aluminum is used in some designs. Steel and granite also have lower coefficients of thermal expansion than aluminum, so they exhibit better dimensional stability in environments with extreme or varying temperatures.
linear guide system also contributes to the straightness and flatness of travel, so the guide mechanisms of choice for a linear stage are high-precision profiled rails, crossed roller slides, or air bearings. These guide systems also provide very stiff support to reduce angular errors, which can lead to Abbé errors when there’s an offset between the origin of the error (the guide) and the point of interest (tooling point or load position).
While many types of linear motion systems use high-precision drive mechanisms, linear stages overwhelmingly use one of two technologies: a high-accuracy ball screw or a linear motor. Linear motors typically provide the highest level of positioning accuracy and repeatability, since they eliminate the compliance and backlash inherent in a mechanical drivetrain and coupling between the drive and the motor. For the special case of sub-micron positioning tasks, piezo actuators or voice coil motors are typically the drive mechanisms of choice, for their highly accurate, repeatable motion.
|
shamaizas
Joined: 21 Nov 2022
Posts: 29
Posted: 2023-06-02 07:19
Back to top
Reply with quote
|
I found this blog commonly more enlightening than the others I've analyzed as of now.
Hot Call Girls in Jaipur
I'm what's more enchanted by the amazing subtleties that you have on this site.
|
|
Post new topic
Reply to topic
|
|
|
|
Login
Registration
Slovak
